KMART OAK LOOK STORAGE BOOKSHELF User Manual

1
1
1
2
n
n
k
j
m
g
n
n
S
tep 5:
Use a hammer to attach board 11&12 onto t
he back with nails part i with a
corresponding position.(as per below diagram).
Step 7:
At last, attach the wall fixing onto the wall with part l&j&g.
S
tep 6:
Attach wall fixing part m1 onto board 1 with part K&j into a corresponding
position (as per below diagram). Attach stickers onto the screws holes after all.
stickers here to cover the screw holes
same as the other side.
ATTENTION: DO NOT TIGHTEN THE SCREWS FULLY DURING ASSEMBLY. FULLY
TIGHTEN SCREWS AFTER THE FINAL ASSEMBLY STEP.
o o
o
o
o
Warning:
• It is strongly recommended that this product is permanently fixed to the wall.
• Please seek professional advice if you are in doubt of what fixing device to use.
• Regularly check that anchors are securely maintained
• Use safety drawer locks to prevent children climbing
• Stability of tall items may be affected by thick pile carpet or uneven floors
• Do not place unanchored televisions on furniture (If applicable)
Caution: for your safety when attaching the anchor fixings, please note the following:
Check any electrical wires or plumbing inside the wall before drilling any holes (if you are
unsure please seek professional advice from a qualified tradesperson) .

KMART OAK LOOK STORAGE BOOKSHELF Specifications

General

Brand	KMART
Model	OAK LOOK STORAGE BOOKSHELF
Category	Indoor Furnishing
Language	English