Knorr-Bremse BENDIX TIM G2 User Manual

10
U s e r M a n u a l
Confirm that the
Trailer‘s parking
brake is NOT active
then press ENTER.
...installation test continued.
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
Examples:
Confirm that wheel
speed sensors have
been set, then
press ENTER.
= Confirm
Confirm that the
Truck‘s parking
brake is applied
then press ENTER.
= Confirm
= Confirm
(if reservoir pressure > 6Bar)
2x
2x
Install. Check:
Reserv. Press:
S-C Sensor:
S-D Sensor:
Reserv. Press:
S-C Sensor:
S-D Sensor:
Demand Press:
S-C Sensor:
S-D Sensor:
Demand Press:
Tilt Angle:
< 5
o
Installation test
has been success-
fully executed.
Please switch igni-
fully executed.
Please switch igni-
tion OFF-ON to
memorize status.
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
2x
END
Accelerate selected
wheel to 3mph
Fully apply brake
pedal
TEBS mounting angle
within tolorance
Confirm that
cables are securely
clipped, then
press ENTER.
= Confirm
Overview of wheel
location, “Confirm”
Overview of wheel
location, “Confirm”
Accelerate selected
wheel to 3mph

Knorr-Bremse BENDIX TIM G2 Specifications

General

Brand	Knorr-Bremse
Model	BENDIX TIM G2
Category	Control Unit
Language	English