SAFETY INFORMATION
3
KNOW THE TOOL
To operate this tool, carefully read this manual and all labels afxed to the impact wrench before
using. Keep this manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualied service technician.
READ ALL INSTRUCTIONS THOROUGHLY
GENERAL SAFETY RULES FOR ALL POWER TOOLS
WARNING: Some dust created by using power tools contains chemicals known to the
State of California to cause cancer and birth defects or other reproductive harm.
WARNING: Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well-lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive environments, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to lose control.
Make the workshop child-proof with padlocks, master switches, or by removing starter keys.
Use the right tool. Don’t force a tool or attachment to do a job for which it was not designed.
ELECTRICAL SAFETY
Double-insulated tools are equipped with a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not t in the outlet,
reverse the plug. If it still does not t, contact a qualied electrician to install a polarized outlet.
Do not change the plug in any way. Double insulation eliminates the need for a three-wire,
grounded power cord and grounded power-supply system.
Avoid contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded while using the tool.
Do not expose power tools to rain or wet conditions. A wet power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord to carry the tool or to pull the plug from an outlet. Keep
the cord away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
To Next Page
Loading...
Need help?
General
