Kobalt 6904 User Manual

2
TABLE OF CONTENTS
Product Specications ......................................................................................2
Package Contents ............................................................................................3
Safety Information ............................................................................................ 4
Assembly Instructions ......................................................................................8
Operating Instructions ...................................................................................... 9
Care and Maintenance ...................................................................................10
Troubleshooting.............................................................................................. 11
Warranty ......................................................................................................... 11
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATIONS
Motor: 120V, 60 Hz, 8A
No-load Speed: 2100 RPM
Impacts per minute 2700 IPM
Anvil Size 1/2” (12.7 mm)
Maximum fastening torque 350 ft.-lbs
Capacity (Standard bolt) M12 - M20 (1/2” - 3/4”) (12.7 mm – 19.1 mm)
Capacity (High-tensile bolt) M12 - M16 (1/2” - 5/8”) (12.7 mm – 15.9 mm)
7-pc socket set 11/16", 3/4", 13/16", 7/8", 17mm, 19mm, 21mm

Kobalt 6904 Specifications

General

Impacts Per Minute (IPM)	0-4000
No Load Speed (RPM)	0-2700
Brushless	Yes
Maximum Torque (in-lbs)	1800
Voltage	24V
Chuck Size	1/4 inch
Battery Type	Lithium-ion
Chuck Type	Hex