4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
/min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations
Read The Operator’s
Manual
To reduce the risk of injury user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 when operating this equipment.
Safety Alert Precautions that involve your safety.
Long Hair
Failure to keep long hair away from the air inlet could result in
personal injury.
Loose Clothing
Failure to keep loose clothing from being drawn into air intake
could result in personal injury.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Blower Tubes Do not operate without tubes in place.
Impeller Blades
Rotating impeller blades can cause severe
injury.
To Next Page
Loading...
Need help?
General
