To Next PageTo Next PageWhy is my Kobalt KHT 1040B-03 Trimmer not working?
If your Kobalt Trimmer isn't working, it might be due to a low battery. Try charging the battery pack. Also, the battery pack or the trimmer may be too hot. Release the ON/OFF trigger switch and allow the battery or tool to cool down before restarting.
What to do if my Kobalt Trimmer has excessive vibration or noise?
Excessive vibration or noise in your Kobalt Trimmer can be caused by several factors. First, the blades may be dry or corroded; try lubricating them. Second, loose blade bolts can cause vibration; tighten them using a 1/8 in. (3mm) hex wrench. If the blades or blade ridge are bent, contact customer service.
General| Voltage | 40 V |
|---|---|
| Shaft Type | Straight |
| Power Source | Battery |
| Battery Capacity | 2.5 Ah |
| Battery Type | Lithium-ion |
| Charging Time | 60 minutes |
