EasyManuals Logo
Home>Kobalt>Trimmer>KHT 1040B-03

Kobalt KHT 1040B-03 User Manual

Kobalt KHT 1040B-03
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
TROUBLESHOOTING
WARNING
Turn the switch to the “OFF” position and remove battery from the tool before performing
troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not
work.
1. Low battery capacity. 1. Charge the battery pack.
2. The battery pack or the
hedge trimmer is too hot.
2. Release the ON /OFF trigger switch,
wait for the battery or tool to cool
down, then start the tool again.
Excessive
vibration or noise.
1. Dry or corroded blades. 1. Lubricate the blades.
2. Blades or blade ridge
are bent.
2. Contact customer service.
3. Loose blade bolts. 3. Use a 1/8 in. (3mm) hex wrench to
tighten the blade bolts.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Printed in China

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kobalt KHT 1040B-03 and is the answer not in the manual?

Kobalt KHT 1040B-03 Specifications

General IconGeneral
BrandKobalt
ModelKHT 1040B-03
CategoryTrimmer
LanguageEnglish

Related product manuals