13
CARE AND MAINTENANCE
4. After each blade is sharpened, it is required to apply a
light machine oil or lithium based spray-on grease (not
included) to the blades.
TROUBLESHOOTING
If you still have questions or an unresolved issue after going through this troubleshooting guide,
or just want to speak to a Kobalt product expert, please call our customer service department at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday – Friday.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Motor fails to start
when trigger switch is
depressed.
1. Battery is not secure. 1. To secure the battery, make sure
the latch on the top of the battery
compartment snaps into place.
2. Battery is not charged. 2. Charge the battery according to
the instructions included with your
model.
Motor runs, but cutting
blades do not move.
Hedge trimmer damaged. Do not use the hedge trimmer. Call
1-888-3KOBALT (1-888-356-2258) for
technical service.
Hedge trimmer smokes
during operation.
Hedge trimmer damaged. Do not use the hedge trimmer. Call
1-888-3KOBALT (1-888-356-2258) for
technical service.
Motor hums, blades do
not move.
Debris or other may be jamming
the blades.
Remove battery, clear debris blockage
from blades.
To Next Page
Loading...
Need help?
General