7
CARE AND MAINTENANCE
Wipe plastic parts clean using mild soap and warm water. Do not get moisture or water into
interior moving parts.
TROUBLESHOOTING
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-3KOBALT, 8:00 a.m. – 8:00
p.m., ET, Monday – Friday.
Printed in China
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Unit will not
start.
1. Preset pressure setting may
be below the actual pressure
of the item you are inflating.
2. Cord not plugged in.
3. Circuit breaker is tripped.
4. Fuse in 12 Volt DC power
cord blown.
1. Adjust Preset pressure setting to
higher pressure.
2. Plug into a working 120 Volt AC
Outlet or 12 Volt DC Power Outlet.
3. Reset circuit breaker.
4. Replace 10 Amp fuse in 12 Volt DC
power cord.
PART DESCRIPTION
I Presta Valve Adaptor
J Sports Needle
K Raft Nozzle
To Next Page
Loading...
Need help?
General
