13
OPERATING INSTRUCTIONS
5. Dust-Exhaust Adapter
This versatile saw is equipped with a dust-exhaust
Adapter (S) to collect the dust created during
operation. The dust-exhaust Adapter can be
connected to a 1-1/4 in. diameter vacuum hose to
help keep the work area clean.
To attach a 1-1/4 in. vacuum hose
a. Remove the battery from the tool.
b. Insert the dust-exhaust Adapter into the dust
socket (P) in the saw as far as possible.
c. Attach a 1-1/4 in. vacuum hose (not included)
to the dust-exhaust Adapter.
6. Installing/Removing Accessories
DANGER
• This product is only designed for grinding, polishing
and cutting-off. Use for any other purpose is not
recommended and may result in serious injury.
WARNING
• Only use accessories with a Maximum Safe
Operating Speed rated at least equal to the
maximum speed marked on the tool.
• Only use accessories that comply with the correct
size marked on the tool and described in the Product
Specication chart located on page 2 of the manual.
The multi-purpose saw can be used with the cutting
wheel oriented in 2 different positions. One position
uses a standard at wheel for typical straight and
plunge cuts (Fig. 6b). The second wheel position may
be used for making ush cuts along ooring or against
walls and for surface preparation. (Fig. 6c).
To Install a Wheel
a. Remove the battery pack.
b. Depress and hold the spindle-lock button (Q) and
remove the blade bolt (F) by turning it clockwise
with the wrench (R).
c. Remove the washer (G) and the outer ange (E).
WARNING
• If the inner ange (D) has been removed, replace it
before placing the blade on the spindle. Failure to do so could result in serious personal injury.
d. Fit the wheel (U, V, or W) inside the guard and onto the spindle.
e. Replace the outer ange with the protruding section facing outward.
f. Depress and hold the spindle-lock button and replace the blade bolt.
g. Tighten the bolt securely by using the wrench to turn it counterclockwise.
6b
standard at wheel (U, W)
5
P
S
6a
Q
D
C
G
E
F
R
W
U
V
To Next Page
Loading...
Need help?
General