18
Printed in China
TROUBLESHOOTING
WARNING
• Make sure that the paddle switch (K) is in the “OFF” position and detach the battery pack
from the tool before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The tool does not
work.
1. Battery capacity is low. 1. Charge the battery pack.
2. Battery is overheating. 2. Release the switch, wait for the battery
to cool down, then start the tool again.
Wheels cannot be
installed.
Wheel is the wrong size. Refer to specication chart for proper
wheel size.
Auxiliary handle
cannot be installed.
There is dust in the
auxiliary handle socket.
Clean and clear the socket.
Motor overheating. Cooling vents are
obstructed.
Clean and clear vents. Do not cover vents
with hand during operation.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
L G Sourcing, Inc., N. Wilkesboro, NC 28659
To Next Page
Loading...
Need help?
General