EasyManuals Logo
Home>Kobalt>Fan>KMF 1024B-03

Kobalt KMF 1024B-03 User Manual

Kobalt KMF 1024B-03
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
TROUBLESHOOTING
WARNING
Turn the fan power button and pump switch to the “OFF” position and remove battery from
the tool before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not work. 1. Low battery capacity. 1. Charge the battery pack.
2. The battery pack or
fan is too hot.
2. Turn off the fan and allow the fan and
battery pack to cool.
3. The nozzle is clogged
when working,which
will activate internal
protection
3. Clean the nozzle according to the
Nozzle Maintenance section
WARRANTY
For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Printed in China

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kobalt KMF 1024B-03 and is the answer not in the manual?

Kobalt KMF 1024B-03 Specifications

General IconGeneral
BrandKobalt
ModelKMF 1024B-03
CategoryFan
LanguageEnglish

Related product manuals