33
TROUBLESHOOTING
WARNING
• Turn the switch to the “OFF” position, and remove the battery pack from the miter saw
before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The tool does not work. Battery capacity is low. Charge the battery.
Blade binds, jams, or burns
the wood.
1. Improper operation.
2. Dull blade.
3. Improper blade.
1. See “OPERATING
INSTRUCTIONS” section.
2. Replace or sharpen blade.
3. Replace blade.
Saw vibrates or shakes.
1. Damaged blade.
2. Loose blade.
1. Replace blade.
2. Remove the blade and
reinstall it.
WARRANTY
For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
L G Sourcing, Inc., N. Wilkesboro, NC 28659
Printed in China
To Next Page
Loading...
Need help?
General