6
kobalttools.com
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): Phillips screwdriver
ASSEMBLY INSTRUCTIONS
2. Slip tab into slot and screw the nozzle tray (F)
on bottom portion of power washer unit (A).
Secure with screw (AA).
Note: DO NOT use a power screwdriver. When
the screw is completely tight, give a small nal
clockwise twist of the screwdriver.
DO NOT overtighten.
Power Unit Assembly
1. Slide the spray gun holder (B) onto left side of
power washer unit (A).
Note: When placing the gun with the lance
attached, the nozzle will rest in this tray.
1
B
A
2
A
F
AA
Hardware Used
Screw
x 1
AA
To Next Page
Loading...
Need help?
General
