8
SAFETY INFORMATION
• Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the workpiece by hand or against your body leaves it unstable and may
lead to loss of control.
• Keep hands away from cutting area. Do not reach under the material being cut. The
proximity of the blade to your hand is hidden from your sight.
• Always disconnect the battery pack before changing the saw blade.
• Make certain that all adjusting levers and the blade holder are tight before making a cut.
Loose adjusting levers and holders can cause the tool or blade to slip. Loss of control may
result.
• Check that the switch is off before attaching the battery pack. Accidental starting could
cause injury.
• Never touch the saw blade after immediate use. It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool. Use a dust mask or
respirator or connect the tool to an external dust vacuum if cutting generates a great amount
of dust.
PREPARATION
Know Your Reciprocating Saw
This reciprocating saw can be used for the purpose listed: cutting wood products, plastics
and metals. Before attempting to use the reciprocating saw, familiarize yourself with all of its
operating features and safety requirements.
WARNING:
• Do not allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modication is misuse and could result in a hazardous condition
leading to possible serious personal injury.
To Next Page
Loading...
Need help?
General