5
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
No Load Speed Rotational speed, at no load
Alternating Current Type of current
/min Per Minute
Revolutions, strokes, surface speed, orbits, etc., per
minute
Direct Current Type or a characteristic of current
Safety Alert Indicates a potential personal injury hazard.
Read The Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Wet Conditions Alert Do not expose to rain or use in damp locations.
No Blade
Do not install or use any type of blade on a
product displaying this symbol.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
To Next Page
Loading...
Need help?
General