8
SAFETY INFORMATION
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
• Always wait until the power tool has come to a complete stop before placing it down.
The tool insert can jam and lead to loss of control over the power tool.
PREPARATION
Know Your Hammer Drill/Driver
This hammer drill can be used for drilling in all types of wood products, metals, and concrete
and to drive screws. Before attempting to use the hammer drill, familiarize yourself with all of
its operating features and safety requirements.
Helpful tool (not included): Phillips screwdriver.
WARNING
• Do not allow familiarity with the hammer drill to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be
sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modication is misuse and could result in a hazardous condition
leading to possibly serious personal injury.
To Next Page
Loading...
Need help?
General
