12
OPERATING INSTRUCTIONS
Applications
How to use your air compressor
Air compressors are utilized in a variety of air
system applications. Match hoses, connectors, air
tools, and accessories to the capabilities of the air
compressor.
You may use this tool for purposes listed below:
• Operating air powered tools requiring less than
4.0 SCFM @ 90 PSI.
• Powering pneumatic nail guns, inating tires,
cleaning/blowing with pressurized air.
WARNING:
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufcient to inict serious injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating power tools. Failure to
do so could result in objects being thrown into your
eyes resulting in possible serious injury.
CAUTION:
Do not use in an environment that is dusty or
otherwise contaminated. Using the air compressor
in this type of environment may cause damage to
the unit.
• Ensure the tank drain valve (H) is closed (see Fig.
5).
• Ensure the ON/OFF switch (C) is in the OFF (O)
position and the air compressor is unplugged (see
Fig. 6).
• Ensure the pressure regulator knob (D) is turned
fully counterclockwise (see Fig. 6).
• If not already installed, attach the hose to the
compressor.
5
H
Close
Open
6
D
C
To Next Page
Loading...
Need help?
General
