4
Step 1
Align the handle to the frame
of the pressure washer
Step 3
Connect the garden hose
hose to the INLET.
Hand tighten.
Step 4
Connect the high-pressure
hose to the OUTLET.
Hand tighten.
Step 5
Connect the high-pressure
hose to the gun assembly.
Hand tighten.
Step 6
Connect the lance
to the gun assembly.
Hand tighten.
Assembly Instructions
Step 2
Insert bolts and tighten
with the hardware provided.
Note: Check for visible shipping damage. Shipping damage will cause problems in the operation
of this unit. Contact the Customer Service Hotline immediately if there are missing or damaged
parts. DO NOT return this product to the store.
CAUTION: Before connecting hoses to the pressure
washer, ensure that the supply hose is free of debris.
Any foreign particles entering the pump will damage the unit.
CAUTION: If the lance is not
securely locked into place, it
could be ejected under high-
pressure when operating the
gun, possibly causing injury
or damage.
To Next Page
Loading...
Need help?
General
