6
Quick-Connect Nozzles
Four colour-coded quick-connect nozzles are
included with the pressure washer:
Red: This nozzle produces a high-pressure
pencil-point spray (0˚) ideal for removing
stubborn dirt.
Yellow: This nozzle produces a high-pressure
flat spray (15˚) suitable for cleaning
large surface areas.
Green: This nozzle produces a high-pressure
flat spray (25˚) suitable for cleaning
larger surface areas.
Black: This nozzle produces a low-pressure
spray that must be used for application
of detergents.
CAUTION: The pencil-point spray (0˚) is very
aggressive. For most cleaning applications, the
flat spray nozzles (15˚ and 25˚) should be used
to avoid damage to the surface being sprayed.
NOTE: The intensity of the spray increases as
you move the lance closer to the surface.
NOTE: When inserting or removing the spray
nozzles from the rubber grommet (located on
the handle) use a twisting action so the rubber
grommet does not disengage from the hole.
Changing Nozzles
CAUTION: When installing or removing a spray
nozzle, always do so with the water turned OFF
at the source and the engine turned OFF.
Using the Accessories
Optional Cleaning Accessories
CAUTION: Your pressure washer operates at fluid pressures and velocities high enough to cause
property damage. Before cleaning any surface, choose an inconspicuous area to test spray pattern
and distance for maximum cleaning results. If painted surfaces are peeling or chipping, use extreme
caution as pressure washer may remove the loose paint from the surface.
KODIAK offers a complete line of Concentrated Detergents to enhance the cleaning performance
of your pressure washer.
Please contact your local retailer for details, or visit our website at www.kodiakpower.ca
Concentrated Detergents (4 Litres)
• All-Purpose Cleaner
• Deck & Fence Cleaner
• Heavy-Duty Degreaser
• House & Window Wash
• Car & Boat Wash 'n Wax
Step 1. Discharge residual pressure by pressing
and holding the gun trigger until no water
comes out of the nozzle.
Step 2. Release the gun trigger and engage the
gun safety-lock.
Step 3. Pull back the collar on the lance socket
to insert a nozzle.
Step 4. Release the collar and pull sharply on
the connection to ensure connection is
secure.
CAUTION: If the nozzle is not securely locked in
place, it can become a projectile. Always ensure
that lance and nozzle connections are secure.
To Next Page
Loading...
Need help?
General
