EasyManuals Logo
Home>Kodiak>Engine>KM10124

Kodiak KM10124 User Manual

Kodiak KM10124
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
STORAGE (Lay-Up)-One Month
CAUTION: Make sure the water side of heat exchanger is drained
when ambient temperature is below 32 Degrees F.
1. Start the engine
2. Treat upper cylinders by spraying recommended engine oil (SAE 10), or
equivalent into the air intake for about two minutes.
3. Open throttle for a short burst of speed.
4. Shutoff engine.
5. Allow engine to stop while spraying recommended engine oil into air intake.
6. Leave spark plugs in holes or seal with suitable threaded plugs.
7. Cover all openings into the engine with dust proof cap or shields.
8. Check coolant protection fluid level.
Storage (Lay-Up) – For Indefinite Period
CAUTION: Make sure the water side of heat exchanger is drained
when ambient temperature is below 32 Degrees F.
1.Drain crankcase completely.
2.Refill with recommended engine oil, (SAE 10) or equivalent.
3.With engine running treat upper cylinders by spraying recommended engine
oil into air intake for about two minutes.
4.Run engine until completely out of gasoline.
5.Restart and run on unleaded gasoline for at least 10 minutes.
6.Open throttle for a short burst of speed.
7.Shut off engine.
8.Allow engine to stop while spraying recommended engine oil into air intake.
9.Check coolant protection.
10.Disconnect and remove battery.
11.Leave spark plugs in holes or seal with suitable threaded metal plugs.
12.Seal all openings in engine and accessories with Non-Hydroscopic
Adhesive Tape.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodiak KM10124 and is the answer not in the manual?

Kodiak KM10124 Specifications

General IconGeneral
BrandKodiak
ModelKM10124
CategoryEngine
LanguageEnglish

Related product manuals