Kohler 60RCLA User Manual

TP-7102 3/20 47Section3 RDC2ControllerOperation
3.18 Programmable Interface
Module (PIM) Menus
The PIM status menu displays the status of inputs and
outputs connected to the programmable interface
module (PIM). This is a status display menu only. Input
and output settings cannot be changed from the RDC2
controller’s user interface.
A personal computer running Kohlerr SiteTecht
software is required to change the input and output
settings. Contact an authorized distributor or dealer for
service.
The Kohlerr OnCuer Plus Generator Management
System can be used to turn outputs on and off. See the
OnCuer Plus Software Operation Manual for
instructions.
tp6810
PIM
Status:
PIM 1 - - >
<- - Return
Input 1
In/Active
Output 1:
In/Active
Input 2
In/Active
Output 2:
In/Active
Output 3:
In/Active
Output 4:
In/Active
Output 5:
In/Active
Output 6:
In/Active
<- - Return
Figure 3-22 Programmable Interface Module (PIM) Status Menu

Kohler 60RCLA Specifications

General

Brand	Kohler
Model	60RCLA
Category	Portable Generator
Language	English