INSTRUCTION
-2-
1
Screw
Washer
Adjusting
Plate
Mounting
Plate
Mounting
Plate
Anchor
Seat
Inlet Hole
T-Valve
Angle
Valve
Hose
1222171-X2-B
INSTALLATION
Slide the bidet seat onto the mounting plate until you feel
it snap into place.
Connect the T-valve to the toilet seat supplied with
hose. Connect the water supply to the T-valve.
Front wash: twist the knob counterclockwise for front wash and its corresponding water pressure adjustments.
Rear wash: twist the knob clockwise for rear wash and its corresponding water pressure adjustments.
Stop: restore the knob to the default position to stop the front / rear wash.
Secure the mounting plate over the inserts of the toilet
bowl with the screws and the washers provided.
Tighten the screws with a screwdriver.
1445659-X2-A
2
3
Front
Rear
Knob
To Next Page
Loading...
Need help?
General
