Kohler K-108 User Manual

1. Spout Installation
Apply a bead of plumbers putty or other sealant to the underside
of the spout or putty ring (if supplied) according to the putty
manufacturer’s instructions.
Locate the center hole and insert the spout.
Slide the metal washer and nut onto the spout shank.
Securely tighten the nut with a wrench. Do not overtighten.
NOTE: For a thin-walled lavatory (such as stainless steel), slide the
dished washer, the washer, and the nut onto the spout shank.
Securely tighten the nut with a wrench. Do not overtighten. It may
be necessary to remove the nut from the top of the spout shank to
ensure proper installation.
Remove any excess putty or sealant.
Nut
Nut
Washer
Washer
Dished
Washer
Apply
Plumbers
Putty
Kohler Co. 3 1010441-2-B

Kohler K-108 Specifications

General

Brand	Kohler
Model	K-108
Category	Bathroom Fixtures
Language	English