Kohler K-1976 User Manual

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
CAUTION: Risk of back injury. Because the tank is already
installed, making the toilet heavy and awkward, two people
should move the toilet into place.
IMPORTANT! This product should be installed by an experienced
installer.
IMPORTANT! Two people are required to lift this toilet into place,
as the tank must be installed prior to moving the toilet into the final
installation location.
IMPORTANT! This product is designed to be installed directly to 4″
D. waste tubing. It is not designed to use a floor flange. Special
installation measures may need to be taken if there is a floor flange
in place, including removing the floor flange or grinding it to allow
for proper fit.
IMPORTANT! For ease of installation, this toilet should be installed
to a waste outlet constructed from PVC.
This toilet does not install to a typical flange. It is designed to
install directly to PVC outlets only. No flange is needed.
Hex
Wrench
Masking
Tape
Socket
Wrench
PVC
Cement
Phillips
Screwdriver
9/16" Drill
Bit
Sponge
Hole Bit
Keyhole/
Compass Saw
Plus:
• Reciprocating Saw
• Soapy Water
• Support Blocks
1052867-2-B 2 Kohler Co.

Kohler K-1976 Specifications

General

Brand	Kohler
Model	K-1976
Category	Toilets
Language	English