-------INTRODUCTION-------
Long-life strength and on-the-job durability are designed and built into
these Kohler engines.
Parts
subject
to
most wear and tear - like cylin-
ders, crankshafts and camshafts - are made from precision-formulated
cast
iron
...
and because the
cast
iron cylinders can be rebored, these
engines can last even longer.
These Kohler engines are easy
to
service. All routine service
parts
-
points, condenser, spark plugs, air cleaner, carburetor - are easily and
quickly accessible.
This manual provides the technician with information and instructions
for servicing and repairing the KT17 & KT19 Series II, and
KT17-
KT19-
KT21 engines.
It
is recommended the technician study
the
procedures
and illustrations in this manual and use them
as
references when per-
forming repairs.
KT engines use one of two types of Pressurized Lubrication Systems.
KT
SMESJ[
engines have a Full Pressure lu-
brication system. The Specification Numbers
for
KT
Series
II
models are:
KT17 Series
II
- Specifications 24300 And
Higher
KT19 Series
II
- Specifications 49200
And
Higher
Other
KT17-KT19·KT21 engines use a Pres-
surized
Spray
lubrication system. The Speci·
fication Numbers for those models are:
KT17 - Specifications 24299
And
Lower
KT19-
Specifications 49199 And Lower
KT21 - All Specifications
Refer
to
Section 5 - Lubrication
System
for additional information.
The
SMESJ[logo
appears throughout this
manual
to
identify information
and
service
procedures unique
to
the
Series
II
models.
2
To Next Page
Loading...
Need help?
General
