SAFETY
1-2 WA480-6
SAFETY AND WARNING DECALS
It is important that all safety and warning decals are in place, not damaged, covered up or removed. It is also important for
the operator to be aware of the decal content and locations the machine as shown in the view below.
Location of Safety Decals
• To ensure that the content of these safety decals can be read properly, be sure that they are placed correctly and always
keep them clean.
• When cleaning any decal, use soap and water. NEVER use organic solvents or gasoline; these solutions may cause the
decal to peel off.
• Your Komatsu Dealer can provide new replacement decals if the ones on the machine are damaged or missing.
• For part numbers of the safety decals, see this manual or check the actual decal then order the new decals from your
Komatsu distributor.
• When replacing damaged or missing decals, be sure that they are placed in the proper location.
• Additional safety or warning decals may be added to your machine, if desired.
To Next Page
Loading...
Need help?
General
