Komatsu PC200-7 User Manual

POSITION FOR ATTACHING SAFETY LABELS SAFETY
2-4
POSITION FOR ATTACHING SAFETY LABELS
The following warning signes and safety labels are used on this machine.
Be sure that you fully understand the correct position and content of labels.
To ensure that the content of labels can be read properly. Be sure that they are in the correct place and always
keep them clean. When cleaning them, do not use organic solvents or gasoline, there may cause the labels to
peel off.
There are also other labels in addition to the warning signes and safety labels. Handle those labels in the
same way.
If the labels are damaged, lost, or cannot be read properly, replace them with new ones. For details of the part
numbers for the labels, see this manual or the actual label, and place an order with Komatsu distributor.
POSITION FOR ATTACHING SAFETY LABELS
www.komatsupartsbook.com
Courtesy of Machine.Market

Komatsu PC200-7 Specifications

General

Operating Weight	20, 000 kg
Engine Model	Komatsu SAA6D102E-2
Engine Power	110 kW (148 hp)
Max Digging Depth	6, 620 mm
Travel Speed	5.5 km/h
Fuel Tank Capacity	400 L
Bucket Capacity	0.8 - 1.0 m³