INTRODUCTION
0-2 PC210LC-10
FORWARD
This manual gives details of the operation and methods of inspection and maintenance for this machine that must be obeyed in
order to use the machine safely. Most accidents are caused by the failure to follow fundamental safety rules for the operation
and maintenance of machines.
Read, understand and follow all precautions and warnings in this manual and on the machine before performing operation and
maintenance. Failure to do so may result in serious injury or death.
Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used. Therefore, the
safety messages in this manual and on the machine may not include all possible safety precautions.
If you carry out any operation, inspection, or maintenance under conditions that are not described in this manual, understand
that it is your responsibility to take the necessary precautions to ensure safety. In no event should you or others engage in the
prohibited uses or actions described in this manual. Improper operation and maintenance of the machine can be hazardous and
could result in serious injury or death.
If you sell the machine, be sure to give this manual to the new owner together with the machine.
Always keep this Operation and Maintenance Manual in the location
shown on the right so that all relevant personnel can read it at any time.
Storage location for the Operation and Maintenance Manual: magazine
box on the left side of the operator's seat.
If this manual is lost or damaged, contact and tell your distributor about the machine model name and the serial No. immedi-
ately to arrange for its replacement. For details regarding the machine model name and the serial No., see the machine serial
No. plate. In order to arrange the proper Operation and Maintenance Manual, you will need to provide the machine model
name and the serial No. to your Komatsu distributor.
This manual uses the international units (SI) for units of measurement. For reference, units that have been used in the past are
given in ( ).
The explanations, values, and illustrations in this manual have been prepared based on the latest information available as of the
date of its publication. Continuing improvements in the design of this machine may lead to additional changes that are not
reflected in this manual. Consult Komatsu or your Komatsu distributor for the latest available information concerning your
machine or with questions regarding information contained in this manual.
• The numbers in circles in the illustrations correspond to the numbers in ( ) in the text. (For example: B - (1)) Komatsu
delivers machines that comply with all applicable regulations and standards of the country to which it has been shipped. If
this machine has been purchased in another country, it may lack certain safety devices and specifications that are neces-
sary for use in your country. If there is any question about whether your product complies with the applicable standards
and regulations of your country, consult Komatsu or your Komatsu distributor before operating the machine.
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
