OPTIONAL EQUIPMENT
STANDARD EQUIPMENT
• Alternator, 35 Ampere, 24V
• Auto-Decel
• Automatic engine warm-up system
• Automatic de-aeration system for fuel line
• Batteries, 110 Ah/2 x 12V
• Boom holding valve
• Cab, capable FOG with optional bolt-on
top guard
• Counterweight
• Dry type air cleaner, double element
• Electric horn
• Engine, Komatsu SAA6D102E
• Engine overheat prevention system
• Fan guard structure
• Hydraulic track adjusters (each side)
• Monitor panel, 7-segment
• Power maximizing system
• PPC hydraulic control system
• Radiator & oil cooler dust proof net
• Rear view mirror, R.H.
• Starting motor, 4.5 kW/24 v x 1
• Suction fan
• Track guiding guard, center section
• Track roller
—PC220-7, 8 each side
—PC220LC-7, 10 each side
• Track shoe
—PC220-7, 600 mm 24" triple grouser
—PC220LC-7, 700 mm 28" triple grouser
• Working light, 2 (boom and RH)
• Working mode selection system
• Air conditioner with defroster
• Alternator, 60 ampere, 24 v
•Arms
—3045 mm 10'0" arm assembly
—2500 mm 8'2" arm assembly
—2000 mm 6'7" arm assembly
• Batteries, large capacity
• Bolt-on top guard OPG level 2 (FOG)
• Boom, 5850 mm 19'2"
• Cab accessories
—Rain visor
—Sun visor
• Cab front guard
—Full height guard
—Half height guard
• Heater with defroster
• Long lubricating intervals for implement
bushing (500 hours)
• Multi-Function Color Monitor
• Rearview mirror (LH)
• Seat belt, retractable
• Seat, suspension
• Service valve
• Shoes, triple grouser shoes
—PC220-7
700 mm 27.6",
800 mm 31.5"
—PC220LC-7
600 mm 23.6", 800 mm 31.5"
• Starting motor, 5.5 kW/24 v x 1
• Track roller guards (full length)
• Track frame undercover
• Travel alarm
• Working lights (2 on cab)
• Ditch cleaning bucket
—Capacity
SAE heaped 0.80 m
3
1.05 yd
3
CECE heaped 0.70 m
3
0.92 yd
3
Width 1800 mm 70.9"
• Slope finishing bucket for scraping
slopes of banks
—Capacity
SAE heaped 0.4 m
3
0.52 yd
3
CECE heaped 0.35 m
3
0.46 yd
3
—Width 2000 mm 78.7"
• Trapezoidal bucket is ideal for digging
ditches and for drainage works
—Capacity
SAE heaped 0.7 m
3
0.92 yd
3
CECE heaped 0.5 m
3
0.65 yd
3
• Ripper bucket for hard and rocky ground
—Capacity
SAE heaped 0.62 m
3
0.81 yd
3
CECE heaped 0.56 m
3
0.73 yd
3
Width 990 mm 39.0"
• Single-shank ripper and three-shank
ripper are recommended for rock-digging
and crushing, hard soil digging,
pavement-removal works, etc.
SPECIAL PURPOSE BUCKET
www.Komatsu.com
CEN00045-03 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Japan 200808 IP.As(10)
To Previous Page
Loading...
Need help?
General
