E-1
INSTALLATION MANUAL
//
A161-9601-01
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Caution:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa-
tion.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the dual scan docu-
ment feeder, the reverse automatic document
feeder, or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers supplied with
the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 85 kg (187-3/8 lb))
*1
: When installing the AU-201
with MK-735
*2
: When installing the AU-201
without MK-735
*3
: No particular order in installa-
tion procedures.
*4
: Unable to be installed in
C224.
UK-204
*3
PC-110 PC-210 DK-705
JS-506
Machine
PC-410
SP-501 OC-511DF-701
PK-520
SD-511
MK-730
AU-102
FS-534
Electronic system options
FS-533
PK-519
MK-735
EK-606
*3
EK-607
*3
SC-508
*3
FK-511
*3
VI-506
*4
IC-414
*4
DK-510
MK-734
HT-509
WT-506
AU-201
*2
DF-624
AU-201
*1
KH-102
✱ Electronic system options
A161IXC001DA
Applied Machines: / /
To Next Page
Need help?
General
