E-1
INSTALLATION MANUAL
/
A3GN-9581-00
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly. (Optional devices must be installed after com-
pleting the main unit installation.)
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
Caution:
• Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the machine, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded (mass: approx. 47.5 kg
(104-11/16 lb))
Machine
FS-P03
WT-P02
FK-512*
PF-P13 DK-P03*
AU-201
MK-738*
MK-P02
KP-101
*: Varies depending on the model and applicable marketing area.
Applied Machines: /
To Next Page
Need help?
General
