Kramer VM-2DH User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VM-2DH DisplayPort to DVI/HDMI Converter
8
The VM-2DH provides the ability to acquire the EDID from:
• One output (the relevant output LED lights)
• Two connected outputs in Auto-Mix mode
1
(both output LEDs are lit)
• The initial, default EDID (both output LEDs blink)
Pressing the EDID button briefly causes the output LEDs to indicate the source of
the EDID that was last acquired. If the:
• HDMI OUT LED lights, the HDMI OUT EDID was stored
• DVI OUT LED lights, the DVI OUT EDID was stored
• Both OUT LEDs light, the Auto-Mix
1
EDID was stored
• Both OUT LEDs blink, the default EDID is stored
To acquire the EDID:
1. Connect the power.
2. Connect the output(s) from which you want to acquire the EDID.
3. Press and hold the EDID button to select the desired EDID source.
The OUTPUT LEDs light in the following cycle:
 HDMI OUT
 DVI OUT
 Both LEDS (Auto-Mix)
 Both LEDs blink (default)
4. Release the button when reaching the desired EDID source
2
.
The EDID is acquired.
1 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different resolutions are
connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID
2 If you set the machine to acquire the EDID from an output that is not connected, the default EDID is acquired

Kramer VM-2DH Specifications

General

Brand	Kramer
Model	VM-2DH
Category	Media Converter
Language	English