To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Krups B90 and is the answer not in the manual?
General| Brand | Krups |
|---|---|
| Model | B90 |
| Category | Kitchen Appliances |
| Language | English |
Read instructions, avoid liquids, supervise children, unplug for cleaning, and handle damaged units.
Prohibits outdoor use, cord hazards, proximity to heat, and water immersion.
Covers accessory use, intended use, indoor operation, and proper disconnection.
BeerTender dispenses chilled beer using only Heineken 5L DraughtKegs.
BeerTender is designed for use by responsible adults of legal drinking age.
Explains warning triangles for safety and info symbols for usage tips.
Lists and describes the parts of the BeerTender home draughting system.
Identifies the 5 Liter DraughtKeg and the draught beer tube.
Measures to prevent children from playing with or misusing the appliance.
Specifies appropriate fire extinguishers (CO2) and advises against water/powder types.
Instructions for installing the BeerTender in a safe, stable, and ventilated location.
Details optimal ambient temperature (54-86°F) for cooling performance and preventing damage.
Recommends using a new draught beer tube with each DraughtKeg and where to purchase them.
Explains the importance of chilling the DraughtKeg and methods for optimal temperature.
Emphasizes turning on power before inserting DraughtKeg for scale calibration.
Vital step to clean the detachable pour spout by hand after setup and before first use.
Step-by-step guide for inserting the DraughtKeg and connecting the beer tube.
Instructions for correctly positioning the drip tray and grate for proper function.
Warning about correctly positioning the drip tray on a level surface.
Notes the control panel provides important and useful information.
Explains the display's volume levels and temperature indicator colors for monitoring.
Steps for pouring beer, including rinsing the glass and tilting for optimal pour.
Advice on handling initial foam, tilting the glass, and achieving desired foam head height.
Instructions for emptying and cleaning the drip tray and grate after each use.
Details on cleaning the interior and pour spout for hygiene and beer quality.
Procedure for storing the appliance when not in use, including keg removal and plug disconnection.
Addresses issues where the appliance fails to power up, usually due to connection.
Troubleshoots why no beer is dispensed, covering power, keg status, and handle position.
Solutions for too much foam, including keg temperature, slow handle movement, and shaking.
Explains the scale reset procedure for the volume indicator when changing DraughtKegs.
Identifies slight buzz or hum as normal functioning of the cooling element.
Addresses slow beer flow, typically caused by the tap handle not being fully open.
Explains ice formation due to humid environment or potential system faults.
Solutions for warm beer, relating to insufficient chilling time for the DraughtKeg.
Troubleshoots the lid not closing, checking the tap cover and DraughtKeg installation.
Addresses temperature indicator issues, linking them to direct sunlight or hot environments.
Explains increasing temperature display due to cold appliance installation and system compensation.
Provides contact information for questions, including website, phone number, and mailing address.
