EN
GENERAL MAINTENANCE
Auto-on You can set the automatic power-on to a certain time.
Auto-off You can choose the time after which your appliance will
automatically switch off (time without use).
Auto rinse You can choose whether or not to activate automatic rinsing of the
coffee nozzle when the coffee maker is switched on.
Recipe settings You can also return to the default settings of the recipes.
Rinsing Allows you to access rinsing of the One Touch Cappuccino block
or the appliance.
Cleaning Allows you to access cleaning of the One Touch Cappuccino block
or the appliance.
Descaling Allows you to access the descale program.
This function is not active until the number of recipes made has
been reached.
Filter Allows you to access the lter program.
Drinks prepared Displays the total number of ristretto, espresso, coffee,
cappuccino/ latte, and the total recipes prepared.
Coffee cleaning
circuit
Indicates that it should be carried out after x number of cycles.
Descaling Indicates that it should be carried out after x number of cycles..
Filter Indicates that this should be changed after x number of cycles.
Maintenance
All these options allow you to start the selected programs. You then have to follow the on-
screen instructions.
To exit the maintenance menu, press
.
Info
The “Info” menu allows you to access a certain information on your use and certain stages
in the life of your appliance. It also provides information on the appliance’s maintenance.
Below are the informations available.
Emptying the coffee grounds collector, coffee drawer and the
drip tray
After a certain number of drinks prepared, the machine will ask you to empty the coffee
grounds collector and to clean the coffee drawer. Failure to perform these operations
correctly can damage your appliance.
15
To Next Page
Loading...
Need help?
General
