To Next PageTo Next PageTo Previous PageTo Previous Page
Why does my Krups Espresso Automatic EA89 still say to fill water tank?
If the water tank warning message is still displayed on your Krups Coffee Maker after filling the tank, check that the tank is installed correctly on the device. The float at the bottom of the tank should move freely; check and unblock it if necessary.
Why is there water under my Krups Espresso Automatic EA89 Coffee Maker?
If there is water underneath your Krups Coffee Maker, wait 15 seconds after the coffee has finished flowing before removing the water tank. Check that the drip tray is correctly positioned and always in place, even when the appliance is not in use. Ensure the drip tray isn't full and is not removed during a cycle.
Why won't my Krups Coffee Maker switch on?
If your Krups Coffee Maker does not switch on when you press the ON/OFF button (for at least 3 seconds), check your fuses and plug sockets. Also, ensure that the two power plugs are correctly inserted into the socket.
Why does my Krups Coffee Maker dispense coffee too slowly?
If the coffee from your Krups Coffee Maker is dispensing too slowly, try these steps: adjust the ‘fineness of grind’ dial to the right for a coarser grind, run several rinsing cycles, perform a machine clean, and replace the Claris Aqua Filter System cartridge.
What to do if my Krups Espresso Automatic EA89 One Touch Cappuccino block doesn't suck milk?
If the One Touch Cappuccino block on your Krups Coffee Maker isn't sucking milk or producing froth, ensure it's correctly assembled, especially the connector in the milk tube. Check for blockages in the steam nozzle and clean if necessary. Soak the connector in hot, soapy water, then rinse and dry. Ensure the flexible pipe isn't blocked or twisted and is properly inserted to avoid air leaks. Make sure it's fully immersed in the milk. Rinse and clean the block. Using fresh, pasteurized, or UHT milk that has been recently opened, and a cold container, is also advisable.
How to make my Krups Espresso Automatic EA89 Coffee Maker espresso hotter?
If the espresso or coffee from your Krups Coffee Maker isn't hot enough, run a coffee circuit rinsing cycle first. Increase the coffee temperature in the Settings menu. Also, warm the cup by rinsing it with hot water before making your drink.
How to fix weak coffee from my Krups Espresso Automatic EA89?
If your coffee from Krups Coffee Maker is too lightly coloured or too weak, avoid using oily, caramelised, or flavoured coffee beans. Check that the coffee bean container has coffee and is dispensing correctly. Decrease the preparation volume and increase the strength using the Dark function. Adjust the grinding fineness dial to the left for finer grounds. You can also make the drink in two cycles using the 2 cups function.
What happens if there's a power failure during a Krups Coffee Maker cycle?
If a power failure occurs during a cycle of your Krups Coffee Maker, the appliance will automatically restart when the power is switched back on.
Why is there milk in my Krups Espresso Automatic EA89 Americano?
If there are traces of milk in an Americano or hot water from your Krups Coffee Maker, complete a milk rinsing cycle or dismantle and clean the one touch cappuccino accessory before running the preparation.
How to unblock the steam nozzle on my Krups Coffee Maker?
If the steam nozzle on your Krups Coffee Maker seems blocked, dismantle the nozzle from its support using the dismantling key. Replace the support without the nozzle. Start the rinse cycle for the One Touch Cappuccino block to remove any remaining deposits. Clean the steam nozzle, ensuring the opening is not obstructed by milk or limescale, using the cleaning needle if needed.
General| Type | Automatic Espresso Machine |
|---|---|
| Series | EA89 Series |
| Coffee Strength Settings | Adjustable |
| Power | 1450 Watts |
| Pump Pressure | 15 bar |
| Programmable | Yes |
| Removable Drip Tray | Yes |
| Ground Coffee Option | Yes |
| Milk Frother | Yes |
| Number of Cups | 2 |
| Warranty | 2 years |
| Water Tank Capacity | 1.7 L |
| Color | Black |
| Material | Stainless Steel/Plastic |
Explains the meaning of warning and information symbols used in the manual.
Lists the components included with the coffee machine upon purchase.
Provides an overview of the appliance's main components and their functions.
Instructions on downloading the KRUPS app and setting up a user account.
Guide to activating Bluetooth and connecting your smartphone to the machine.
How to modify machine settings remotely using the KRUPS app.
Covers initial setup, connection, power-on, language, units, and date/time settings.
Instructions on turning on the appliance and setting auto-off timers for energy saving.
Explains rinsing the coffee circuit and detailed steps for installing the water filter cartridge.
Guide to determining water hardness and preparing the appliance with water and beans.
Adjusting grinder, coffee outlet, stopping preparation, and using the double preparation function.
Steps for preparing coffee drinks via direct access and adjusting strength/volume.
Options for adjusting milky drink settings and preparing Cappuccino/Macchiato.
How to adjust tea volume and temperature, and prepare different tea types.
Instructions for preparing Ristretto, Doppio, Americano, and frothy milk.
Accessing settings, configuring date, time, language, units, and screen brightness.
Adjusting coffee/tea temperatures and setting water hardness levels.
Configuring auto-on/off, automatic rinsing, and drink-specific settings.
Accessing maintenance options, cleaning the milk system, and rinsing the coffee circuit.
Instructions for emptying the coffee grounds collector and the drip tray.
How to manually rinse circuits and utilize automatic cleaning programs.
Details on running the automatic cleaning program for the coffee circuit.
Step-by-step guide to disassembling the One Touch Cappuccino block for thorough cleaning.
Procedure for descaling the steam circuit, including warnings and steps.
Corrective actions for malfunctions, power issues, grinder noise, and milk system problems.
How to address steam nozzle blockages, no steam output, and steam leaks from the drip tray.
Explains drip tray emptying prompts and issues with milk suction or froth production.
Steps for appliance reset, troubleshooting descaling errors, and milk/water flow problems.
Addressing water leaks underneath the appliance and warm water after operation.
Resolving collector prompt issues and slow coffee dispensing.
Tips for improving beverage temperature, strength, and color.
Corrective actions for no coffee, power failures, and adjusting tea temperature.
Troubleshooting app connectivity, ground coffee usage, and steam appearance under the grain tray lid.
Explains collector full warnings and the unavailability of the extra shot function.
