CORD STORAGE
Unused cord can be stored inside the coffee maker (d). To insert the unused
cord, push it inside the store location (d) as long as you need. fig.4
MAKING COFFEE
See drawing N° 5 to 13.
n
Open the top lid by pressing the open button (b) and fill the water tank
with cold water taking careful note of the number of cups. Use filtered
water if possible.
The water level indicator displays the number of cups by turning from light
to dark as the water level rises.
n
Insert the jug or thermal pot (f) after prewarming by rinsing it out with hot
water (prewarming the jug will help keeping coffee hotter) securely in
place (e). Be sure the jug sits straight and level on the heating plate/base
(e) before starting the brew cycle.
n
Place a paper or permanent filter in the filter holder basket (depending
on the model).
Krups original accessories (according to model):
- #4 paper filters 100-pack. Item #983
- #4 size gold tone filter. Item #049
n
Add the ground coffee in the filter or permanent filter (depending on the
model).
n
Measure one rounded coffee scoop per (140 ml) cup of water.
Note : Pay attention to max level indicated on the permanent filter.
n
This simple step is critical to the taste of your brewed coffee.
n
See your brewing guide on page 24 for more detail.
n
Close the lid. The machine is ready to brew.
n
For immediate brewing, press the ON/OFF button and the brew cycle
will begin. You will then hear a warning signal.
n
The on/off button will remain red during the cycle and for 30 minutes
afterwards to indicate that the coffee will be kept warm on the heating plate.
n
You can turn the machine off at any time by pressing the ON/OFF button
again. You will then hear a warning signal.
19
EN
KR_CAFETIERE_DAHLSTROM_ELECTRO_NC00125646_Mise en page 1 08/07/14 09:57 Page19
To Next Page
Loading...
Need help?
General
