English
14
n Then turn the dial to the O (i1) (fig. 15) position and wipe the
outside of the steam nozzle with a clean cloth.
For thorough cleaning of the steam nozzle, see Section 7, “Cleaning of
the steam Nozzle”.
7. CLEANING AND MAINTENANCE
OF THE APPLIANCE:
n Make sure the coffee machine is unplugged and completely cooled
down before you begin to clean it.
n The removable parts can be cleaned using a cloth and gentle
washing-up liquid and water.
n Do not immerse the coffee machine in water or any other liquid.
OF THE FILTER HOLDER HOUSING:
n Using a damp cloth, regularly clean the filter holder housing in order to
remove any coffee residue which may be stuck there.
n To prolong the life of the percolation head gasket seal, do not put the
filter holder back into place if the coffee machine is not to be used for
a long time.
OF THE STEAM NOZZLE:
n Regularly remove the plastic accessory of the steam nozzle (k)
(Fig. 16) and rinse it.
n To unblock the hole in the steam nozzle outlet, you may use a needle.
OF THE DRIP TRAY:
n The drip tray must be emptied after each time the appliance is used.
n If multiple espressos are prepared one after another, it should be
emptied from time to time (every 6 cups of espressos approximately)
(fig.17).
n The presence of water is normal and is not the sign of a leak. If
necessary, clean the drip tray (m) and its grid (l) with water and a
little gentle washing-up liquid, rinse and dry.
n Make sure the drip tray is put back into place properly (fig. 18).
Caution! Do not put any of these parts into the dishwasher.
IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page14
To Next Page
Loading...
Need help?
General
