KSB Hya-Solo DSV Series - User Manual

Pressure Booster System
Hya-Solo DSV
From series 2015w13
Installation/Operating Manual

KSB Hya-Solo DSV Series Specifications

General

Brand	KSB
Model	Hya-Solo DSV Series
Category	Water Pump
Language	English

Summary

General Information and Principles

Safety Guidelines and Hazard Symbols

Safety Symbols and Markings Key

Defines safety symbols and their meanings for hazard communication.

Transport, Storage, and Disposal

Product Description and Specifications

Configuration, Function, and Scope

Site Installation Guide

Installation Requirements and Pre-Checks

Installing the Pressure Booster System and Piping

Step-by-step guidance for installing the system and connecting piping.

Piping Installation Details

Dry Running Protection and Power Connection

Instructions for fitting dry running protection and connecting power supply.

Electrical Connections: Cables, Inputs, and Outputs

Commissioning, Start-up, and Shutdown Procedures

Commissioning Prerequisites and Dry Running Protection

Lists conditions for commissioning and specifics on dry running protection.

Commissioning and Start-up Steps

Step-by-step guide for commissioning and starting the pressure booster system.

System Power-On Procedure

Commissioning Checklist and Shutdown

Operating the Pressure Booster System

Control Panel Operation, Menus, and Settings

Servicing and Maintenance

General Safety and Maintenance Procedures

Covers safety regulations, inspection, supervision, checklists, and pre-charge pressure setting.

Trouble-shooting Guide

Pressure Booster System and Frequency Inverter Faults

Identifies common problems and their remedies for the booster system and frequency inverter.