KTM 1290 SUPER ADVENTURE R 2018 User Manual

26 SUBSTANCES
338
Brake fluid DOT 4 / DOT 5.1
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that
exhibits the corresponding properties.
Recommended supplier
Castrol
– REACT PERFORMANCE DOT 4
Motorex
®
– Brake Fluid DOT 5.1
Coolant
Guideline
– Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
– Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protec-
tion and lubrication properties.
– Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least −25 °C (−13 °F)

KTM 1290 SUPER ADVENTURE R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Torque	140 Nm
Bore x Stroke	108 mm x 71 mm
Transmission	6-speed
Fuel System	Electronic fuel injection
Cooling	Liquid cooled
Front Suspension	WP USD Ø 48 mm
Fuel Tank Capacity	23 liters
Seat Height	890 mm
Weight	217 kg (dry)
Power	160 hp
Rear Suspension	WP monoshock
Front Brake	2 x 320 mm discs, 4-piston radial fixed caliper
Rear Brake	267 mm disc, 2-piston caliper
Traction Control	Motorcycle Traction Control (MTC), disengageable
Wheelbase	1580 mm