KTM 1290 Super Adventure S 2017 User Manual

19 SERVICE WORK ON THE ENGINE 217
V00790-10
–
Remove the screw plug and add the remaining engine oil to upper marking
C
on the
engine oil level viewer.
– Mount the screw plug.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
– Always make sure there is sufficient ventilation when running the engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 212)
– Install the engine guard. ( p. 163)
19.3 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
The engine may be damaged if the engine oil level is too high.
Condition
The engine is at operating temperature.
Preparatory work
– Stand the motorcycle upright on a horizontal surface.
– Check the engine oil level. ( p. 212)

KTM 1290 Super Adventure S 2017 Specifications

General

Engine Type	V-Twin, 4-stroke
Displacement	1301 cc
Torque	140 Nm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Fuel Capacity	23 liters
Power	160 hp (118 kW)
Front Suspension	WP Semi-active Suspension
Rear Suspension	WP Semi-active Suspension
Front Brake	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brake	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME
Traction Control	MTC (Motorcycle Traction Control)
Wheelbase	1560 mm
Seat Height	860 mm
Dry Weight	215 kg