KTM 1290 Super Duke R 2019 User Manual

SETUP 2
5
2.1 Transport mode
H02713-01
This vehicle was blocked for transport in the software.
To operate the vehicle, the vehicle electronics must be enabled.
This process is conducted during initial setup in KTM Dealer.net.
Enabling ensures that the initial setup in KTM Dealer.net is docu-
mented.
Enabling can be performed either temporarily, e.g. for a test ride,
or permanently for vehicle handover.
Info
Make sure that the vehicle is permanently enabled before
handing it over to the customer.
2.2 Unpacking and setting up the vehicle
Preliminary work
– Remove the box.

KTM 1290 Super Duke R 2019 Specifications

General

Displacement	1301 cc
Torque	141 Nm
Transmission	6-speed
Cooling	Liquid cooled
Seat Height	835 mm
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Fuel System	Electronic fuel injection
Final Drive	Chain
Compression Ratio	13.6:1
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Engine Type	V-Twin, 4-stroke
Power	177 hp
Fuel Capacity	18 liters
Front Brake	2 x 320 mm discs, Brembo M50 Monobloc calipers
Rear Brake	240 mm disc, Brembo caliper
ABS	Bosch 9ME combined ABS
Wheelbase	1482 mm
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Dry Weight	189 kg (417 lbs)