8 ERGONOMICS 57
Guideline
Screw, instrument support M10 40 Nm
(29.5 lbf ft)
Loctite
®
243™
– Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and evenly tighten screws
.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
8.3 Setting the basic setting of the clutch lever
L01414-10
– Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
.
Info
Turn the adjusting screw clockwise to increase the distance between the clutch
lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Push the clutch lever forward and turn the adjusting wheel.
Do not make any adjustments while riding.
To Next Page
Loading...
Need help?
General
