9 SERVICE SCHEDULE
36
after every race
Every 40 operating hours
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours
Once after 1 operating hour
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for
cracking, tightness, and correct routing.
○ ● ● ● ● ●
Check the antifreeze and coolant level. ( p. 104) ○ ● ● ● ● ●
Check the cables for damage and for routing without kinks. ● ● ● ● ●
Check that the throttle cables are undamaged, routed without sharp bends, and set
correctly.
○ ● ● ● ● ●
Clean the air filter and air filter box. ( p. 66) ● ● ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 68) ● ●
Service the fork. ●
Perform the shock absorber service. ●
Check the screws and nuts for tightness. ○ ● ● ● ● ●
Change the fuel screen. ( p. 114) ○ ● ● ● ● ●
Check the fuel pressure. ● ● ● ● ●
Check idle. ○ ● ● ● ● ●
Final check: Check the vehicle for operating safety and take a test ride. ○ ● ● ● ● ●
Read out the error memory after the test ride using the KTM diagnostics tool. ○ ● ● ● ● ●
Make the service entry in the KTM Dealer.net and in the Service and Warranty Book-
let.
○ ● ● ● ● ●
○ One-time interval
● Periodic interval
9.3 Recommended work
Annually
Every 100 operating hours
Every 50 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid. ●
Change the rear brake fluid. ●
Change the hydraulic clutch fluid. ( p. 81) ●
Lubricate the steering head bearing. ( p. 58) ●
Service the fork. ○
Perform the shock absorber service. ○
Change the fuel filter. ●
Perform minor engine service including removing and installing engine. (Change spark
plug and spark plug connector. Change piston, check and measure cylinder; check
cylinder head. Check camshaft and cam lever. Check timing assembly. Change intake
flange.)
● ●
To Next Page
Loading...
Need help?
General
