3 WORK 12
401429-10
–
Press the SET button
for two seconds.
The fuel level warning lamp
switches off. TRIP F is set to 0.0 and the dis-
play returns to the previous display mode.
Info
If you do not press the SET button
, the reset takes place automatically
after approx. three minutes.
3.13 Setting the clock
Condition
The motorcycle is stationary.
401444-01
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO mode is active.
– Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
– Press the MODE button to set the hour.
– Press the SET button to set the minute.
– Keep the MODE button and the SET button pressed simultaneously.
The time is set.
3.14 Setting the kilometers or miles
Info
If the unit is changed, the value is retained and converted accordingly.
Make the setting according to the country.
Condition
The motorcycle is stationary.
401444-01
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO display mode is active.
– Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h.
To Next Page
Loading...
Need help?
General
