KTM 85 SX 19 User Manual

11 SERVICE WORK ON THE CHASSIS 36
11.10 Installing the lower triple clamp x
C00250-10
Main work
– Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 87)
– Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
– Slide on O-ring 2.
– Correctly position upper steering head seal 1.
C00252-10
– Position the upper triple clamp with the steering.
– Mount nut 3, but do not tighten it yet.
L00042-11
– Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws 4 to the front.
L00082-10
– Tighten screws 5.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)

KTM 85 SX 19 Specifications

General

Brand	KTM
Model	85 SX 19
Category	Motorcycle
Language	English