Do you have a question about the Kubota L2350 and is the answer not in the manual?
Engine Type | Diesel |
---|---|
Cylinders | 3 |
Transmission Type | Gear |
Gears | 8 forward and 2 reverse |
PTO Power | 20 hp |
PTO Speed | 540 rpm |
Hydraulic System | Open center |
3-Point Hitch | Category I |
Key precautions and checks before starting tractor operation.
Fundamental rules for operating the tractor safely from the operator's seat.
Detailed technical specifications including dimensions, capacities, and tire sizes.
Table of tractor traveling speeds based on gear selection and tire size.
Procedures for safely loading and unloading the tractor onto trailers or trucks.
Identification and function of the tractor's instrument panel gauges and indicators.
Location and operation of various control levers, pedals, and switches on the tractor.
Instructions for operating the Power Take-Off (PTO) system safely and effectively.
Adjustment of the 3-point hitch lowering speed for implement control.
Information on adjusting front and rear wheel treads for stability and traction.
Specifications for front and rear wheel hubs, including bolt circle and bolt sizes.
Recommended tire inflation pressures for various tire sizes on the tractor.
Guidance on selecting and applying front and rear ballast for stability and traction.
Step-by-step guide for starting, warming up, and operating the tractor's engine.
Procedures for starting, driving, and stopping the tractor in various conditions.
Safety precautions and attachment points for pulling implements or loads.
Essential checks to perform while driving the tractor to ensure proper function.
A checklist of daily inspections to prevent potential issues and ensure safe operation.
Procedures for checking, refueling, and bleeding the fuel system.
Instructions for checking and changing the engine oil and its filter cartridge.
Guidance on cleaning and replacing the air cleaner element for engine performance.
Procedures for checking, charging, and maintaining the tractor battery.
Information on fuse locations, types, and light bulb replacement.
Recommendations for checking and replacing rubber lines and hoses to prevent leaks.
Identification of greasing points and recommended intervals for maintenance.
Procedure to check and adjust the free travel of the clutch pedal.
Procedure to check and adjust the free travel of the brake pedals.
How to check and adjust the toe-in for proper steering and reduced vibration.
Method for checking and adjusting the tension of the fan belt.
Procedure to adjust front axle play to prevent vibration and steering issues.
How to check and adjust the steering wheel play for optimal control.
Detailed steps for preparing the tractor for extended storage to maintain condition.
Steps for preparing the tractor for use after a period of storage.