31HYDRAULIC UNIT
AUXILIARY HYDRAULICS
BHydraulic Block Type Outlet
Hydraulic block type outlet is useful when adding
hydraulically operated implement such as: front end
loader, front blade, etc.
When implement is attached
1. Remove the block cover.
2. Route the implement inlet, outlet, and return hoses as
shown in the illustration.
(1) Block cover (A) From gear pump
(B) To implement
Max flow
26.6 L/min
[L3200]
25.7 L/min
[L3800]
Max pressure
16.2 Mpa (165 kgf/cm
[L3200, L3800]
(C) From implement(Outlet)
(D) From implement(Tank port)
To Next Page
Loading...
Need help?
General
