INSTALLATION MANUAL
PLASTIC CANOPY
(77700-VC5011, VC5011) (color: black)
KUBOTA RTV-X900, RTV-X1120D, RTV-XG850
Estimated assembly time: 30 minutes
PRINTED IN THE USA © KUBOTA TRACTOR CORPORATION 2019 Code: 77700-05183 (Rev. D)
IMPORTANT!
CAB COMPONENT ORDER OF INSTALLATION:
1. Canopy Mounts (Canopy Kit)
2. Windshield Assembly
3. Door Strikers & Hinge Mounts (Door Kit)
4. Rear Panel Assembly
5. Canopy Assembly
6. Door Assemblies
NOTE: Front Heavy Duty Springs (V5218) or Heavy Duty Spring Damper Assembly (V5219) is
required if complete cab is installed (RTV-X900, RTV-X1120D, RTV-XG850).
BEFORE INSTALLING CANOPY
Read all instructions and safety instructions in this manual.
Refer to your machine’s operator’s manual and safety instructions on your
machine’s safety decals.
Wear appropriate personal protective equipment (PPE) when performing work.
Hang a "DO NOT OPERATE" tag in operator station.
If installing windshield and/or rear panel, install those components before installing
canopy.
If installing work lights, it will ease assembly if they are installed prior to installing
canopy onto vehicle.
WARNING
To avoid personal injury or death:
Cabs, blades, and general accessories add additional weight to the base vehicle. Deduct the accessory’s total weight
from the vehicle’s rated capacity including passenger and driver. Never operate the vehicle outside of its rated weight
capacity.
Exposure to carbon Monoxide can cause illness, serious injury, or death. Never operate vehicle if suspicious of
Carbon Monoxide. Inspect exhaust system for leaks monthly. Leaks can result from loose connections, corrosion,
cracks, or other damage to the exhaust manifold. If leaks are found, repair or replace exhaust system. Do not use
vehicle until repair or replacement is complete.
This canopy does not provide protection from: a rollover (or other accidents), from flying objects (including golf balls),
or from lightning. When lightning threatens, take cover and do not operate vehicle.
To Next Page
Need help?
General
