Kubota T1770 User Manual

ASSEMBLY
OM 0297SB-AU
22
Reinstalling the Snowblower on the Tractor
WARNING:
To avoid serious injury:
Park the tractor on level ground, set to
neutral, apply parking brake, disengage
drive pulley, place all control levers to
neutral, shut off the engine, remove the
ignition key and make sure all parts in
rotation have stopped before leaving the
operator's seat and installing or
dismounting the snowblower on the tractor.
NOTE:
The mower deck must be removed.
Refer to the tractor Operator's Manual for
instructions.
1. Reinstalling the Subframe on the Tractor:
NOTE:
The installation must be made
according to the tractor model being used
(see figure).
 Secure the rear section of the subframe
using the 1/2" dia. x 1" pins (item 1).
 Point the lifting arm plate (item 7) upwards
and secure the front section of the subframe
with the 1/2" dia. pins removed from the
mower (item 2).
 Install the upper belt on the tractor drive
pulley (item 3).
 Reinstall the belt guide on the tractor drive
pulley (not shown).
2. Reinstalling the Snowblower on the
Subframe:
 Attach the snowblower on the subframe
using two 5/8" x 1 7/8" pins (item 4).
 Secure the 5/8" x 8 7/8" pin (item 5) to the
lifting plate (item 6).

Kubota T1770 Specifications

General

Brand	Kubota
Model	T1770
Category	Snow Blower
Language	English